The NanEye 2D is an industry leading and award winning digital miniaturized camera with a footprint size of 1mm x 1mm.
The sensor provides a true system on chip camera head with fully self timed readout sequencing, AD conversion to 10 bit and bit serial data transmission over LVDS.
The proprietary data interface technology permits cable lengths up to 3 meters without any additional components at the distal end. Due to the low energy dissipation on the interface, no complicated shielding is required to meet EMC norms. With its 250 x 250 pixels at 3µm pitch, the sensors provide clear and sharp images with outstanding MTF in a very compact size. A frame rate of 44FPS permit synchronization to any type of display.
The NanEye sensor provides delay free, smooth video operation resulting in a safe operation and a clear diagnosis. The sensors are connected to minimal diameter cabling solutions. A small lens is assembled to the chip. This option does not increase the total diameter of the sensor, making it the world's most compact digital camera.
For more information, call PMT at 727-532-6144
NANEYE 2D PRODUCT FACTS
|Resolution||0.0625MP - 250 (H) x 250 (V)|
|Noise||3 x 3 µm2|
|Camera Size|| 1mm x 1mm|
|Shutter Type||Electronic Rolling Shutter|
|Frame Rate||42 - 55 FPS|
|Output Interface||10 bit Digital LVDS|
|Sensitivity||11.5 DN/nJ/cm2 at maximum gain|
|Full Well Charge||15 ke-|
|Dark Noise||1.1 DN rms|
|Dynamic Range||58 dB|
|Fixed Pattern Noise||DSNU: 2.8 [DN] PRNU: 4.8%|
|Chroma||Mono and RGB|
|Supply Voltage||1.8V - 2.4V|
|Power||4.2 mW at nominal supply 2.1V|
|Operating Temparature Range||0°C - 60°C|
|Package||Chip + Lens + Cable|